Copper t-type pipe joint for refrigerator with 180 degree copper elbow
Supply Ability:
6,000,000 Unit/Units per Month
Packaging & Delivery:
PE bags + carton or accept custom -made
Port: Ningbo or Shanghai
T through classification
According to pipe diameter and size
The nozzle ends of equal diameter tees are all of the same size;
The pipe nozzle size of the reducing tee is the same, while the pipe nozzle size of the branch pipe is smaller than the pipe size of the pipe.
By process
1. Hydraulic bulging
The hydraulic bulging of the tee is a forming process by which the axial expansion of the metal material compensates the expansion of the branch pipe. The process is to use special hydraulic press, with three links within the tube billet diameter equal injection liquid, through the two horizontal side of the hydraulic cylinder synchronization of the motion of tube billet, billet after squeezed smaller volume, smaller volume of liquid with the tube billet inside the tube billet and pressure, when pressure tee branch pipe bulge out to the metal material in the liquid in the cylinder and the pipe pressure under the dual role of flow along the mold cavity and the branch pipe.
Three - way hydraulic bulging process can be formed once, high production efficiency; The head of the tee and the wall thickness of the shoulder increased.
Due to the large tonnage of the equipment required by the hydraulic bulging process of seamless tee, it is mainly used for the manufacture of the standard wall thickness tee less than DN400 in China. The suitable forming materials are low carbon steel, low alloy steel and stainless steel with relatively low hardening tendency, including some non-ferrous metal materials, such as copper, aluminum and titanium.
2. Hot pressing
Three-way hot pressing is to flatten the tube billet larger than the diameter of the three-way to the size of the diameter of the three-way.
Cold drawing tee
Make a hole in the part of the drawing branch; The tube billet is heated, put into the forming die, and the punching die of the stretch branch tube is put into the tube billet. Under the action of pressure, the tube billet is compressed radially. In the process of radial compression, the metal flows to the direction of the branch tube and forms the branch tube under the extension of the punching die. The whole process is formed by the radial compression of the tube billet and the drawing of the branch tube. Different from the hydraulic bulging tee, the metal of the hot-pressed tee branch pipe is compensated by the radial movement of the tube billet, so it is also known as the radial compensation process.
Due to the use of heating pressing tee, the material forming equipment tonnage is reduced. It is suitable for the materials of low carbon steel, alloy steel and stainless steel. In particular, large diameter and wall thickness of the tee, usually adopted this forming process.
By material
Carbon steel, cast steel, alloy steel, stainless steel, copper, aluminum alloy, plastic, argon mold, PVC, etc.
Divided by production method
Top, pressing, forging, casting, etc.
Q:What is your terms of payment ?
A:Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shipment.
Q:What are the advantages of RONGDI?
A:We are a company with more than ten years of production experience Air conditioning refrigeration parts 6 series more than 100. It is also a global brand: midea, sharp, daikin, Toshiba and other suppliers.
Q:How about the quality?
A:Each item will be checked twice before packing to insure 100% qualified. We are on the way of getting better all the time!
Q:How long will be the delivery time?
A:The regular item in stock can be shipped within 3-5 days,your customized product maybe takes 15-25 days.
Q:Packaging & Shipping?
A:Packing: wooden pallet, wooden case or with outer carton, or as per customers' specific requirements.
Hot Tags: t type pipe fitting for refrigeration, China t type pipe fitting for refrigeration manufacturers, suppliers, factory, air conditioning u bending, U shaped 180 Degree Copper U Bend, alternatives to air conditioning ducts, refrigerator compressor coiled pipe, demand for air conditioning ducts, air conditioning pipeline replacement
