Air conditioning filters are commonly used air filtration equipment, generally pre-filtering the ventilation system, which are used in many air-conditioning equipment. The outer frame of the air conditioner filter is made of cardboard, and the filter material is non-woven fabric, which is supported by metal mesh, which is very economical. Air conditioner filters are divided into special air conditioners for machine rooms, pre-filtering for ventilation systems, clean air return air filters for clean rooms, pre-filters for high-efficiency filters, pre-filters for air compressors, etc., which are widely used. The maintenance of the air conditioner filter is also very important, so how to clean the air conditioner filter?
At present, the best way to clean the air conditioner filter is to use ultrasonic cleaning equipment. If you use this type of air conditioner filter, it is recommended to use ultrasonic cleaning equipment. The effect is good and economical. The specific steps are as follows:
1. Fully immerse the air-conditioning filter to be cleaned in the cleaning tank equipped with hot water cleaning liquid;
2. Turn on the ultrasonic cleaning equipment switch, the cleaning time setting is determined according to the actual situation, if it is not cleaned within the set time, you can set some time;
3. Remove the air conditioner filter from the cleaning tank, rinse it with clean water, and then blow dry or dry with compressed air;
4. Check whether the air filter is broken or deformed. If there is no problem, you can install it; if it is a small amount of filter, you can soak it for half an hour, then clean it with a brush, and rinse it repeatedly. The spray gun will be better, the effect will be better, pay attention to the pressure of the spray gun can not be too large, so as not to damage the filter equipment, and can not spray.